{ "id": "brass-basin-plug-with-hair-basket-34-to-38mm", "sku": "brass-basin-plug-with-hair-basket-34-to-38mm", "title": "Brass Basin Plug with Hair Basket (34 to 38mm)", "slug": "brass-basin-plug-with-hair-basket-34-to-38mm", "price": 36.99, "currency": "EUR", "availability": "in_stock", "category": "sink-and-bath-plugs", "category_label": "Sink & Bath Plugs", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "100 g", "images": [ "https://drains.irish/dropship-images/sink-and-bath-plugs/brass-basin-plug-with-hair-basket-34-to-38mm/main-brass-basin-plug-with-hair-basket-34-to-38mm.jpg", "https://drains.irish/dropship-images/sink-and-bath-plugs/brass-basin-plug-with-hair-basket-34-to-38mm/brass-basin-plug-with-hair-basket-34-to-38mm-2.jpg", "https://drains.irish/dropship-images/sink-and-bath-plugs/brass-basin-plug-with-hair-basket-34-to-38mm/brass-basin-plug-with-hair-basket-34-to-38mm-3.jpg", "https://drains.irish/dropship-images/sink-and-bath-plugs/brass-basin-plug-with-hair-basket-34-to-38mm/brass-basin-plug-with-hair-basket-34-to-38mm-4.jpg", "https://drains.irish/dropship-images/sink-and-bath-plugs/brass-basin-plug-with-hair-basket-34-to-38mm/brass-basin-plug-with-hair-basket-34-to-38mm-5.jpg", "https://drains.irish/dropship-images/sink-and-bath-plugs/brass-basin-plug-with-hair-basket-34-to-38mm/brass-basin-plug-with-hair-basket-34-to-38mm-6.jpg", "https://drains.irish/dropship-images/sink-and-bath-plugs/brass-basin-plug-with-hair-basket-34-to-38mm/brass-basin-plug-with-hair-basket-34-to-38mm-7.jpg" ], "description_short": "A press-to-switch pop up core in thickened brass, sized for 34 to 38mm drain holes, with a lift-out strainer basket that traps hair and installs by hand in minutes.", "description": "The problem nobody notices until it is annoying\n\nBasin plugs fail slowly. The seal hardens a little each year, the spring gets lazy, and the water you ran for a shave is half gone before you pick up the razor. At the same time, hair slips past the plug a few strands at a time, settles in the bend of the pipe, and quietly gathers soap and toothpaste around itself until the basin takes a full minute to empty.\n\nBoth problems come from the same small part, and both are fixable without calling anyone. The plug core that sits in your drain opening is a self-contained unit. It lifts out, a new one drops in, and you get a fresh seal and a strainer in the same movement.\n\nA brass basin plug with hair basket handles the two jobs together. The press-action cap gives you a proper seal when you want to hold water, and the basket underneath catches the hair that would otherwise end up in the trap.\n\nHow a pop up core actually works\n\nInside the visible cap sits a spring and a locking mechanism, sometimes called a bullet core. Press the cap down and the mechanism catches, holding the plug in the sealed position. Press it again and the catch releases, the spring pushes the cap up, and water drains around the edges.\n\nThat is the whole of it. No chain, no pull rod, no lever linkage running behind your tap. The appeal is that there are very few things to go wrong, and the part that does eventually wear out is the one you can replace by hand in a couple of minutes.\n\nThe strainer version adds a basket below the cap. Water passes through the basket on its way to the pipe, and anything solid stays behind. The basket lifts out so you can clear it, which is the step that keeps your drain flowing.\n\nWhy brass instead of plastic\n\nA plug core lives a hard life. It is wet, then dry, then wet again, dozens of times a day. It gets pressed, released and pressed again, with a spring compressing each time. It sits in soapy water, toothpaste residue and whatever cleaner you last used.\n\nPlastic cores do the job for a while. They tend to crack around the spring housing or go brittle after a couple of years of hot water. Thin pressed steel rusts where the coating chips.\n\nBrass behaves better in that environment. It does not rust, it holds its shape under repeated spring pressure, and it has the weight that makes a plug seat properly rather than bob about. This core is made from thickened brass, which is the main reason it feels different in the hand from the budget plug it is replacing.\n\nGetting the size right\n\nThis is the one step worth slowing down for. The core is made for drain holes with an inner diameter of 34mm to 38mm.\n\nTo measure, pull out your existing plug and look at the metal drain opening in the basin. Measure straight across the inside of that opening, from one inner edge to the opposite inner edge. Work in millimetres and take the widest reading.\n\nIf the number lands between 34 and 38, you are fine. If it sits right at the top of that range, use the rubber ring included in the pack to build out the diameter so the core grips properly. If your measurement comes in under 34 or well over 38, this is not the right size and you should look for a core matched to your opening.\n\nDo not measure the old plug cap, measure the hole. Caps are usually wider than the opening they cover, and going by the cap is the most common way people end up with a part that will not seat.\n\nWho it suits\n\nAnyone with a slow bathroom drain is the obvious case. If you have long hair in the house, or two or three people sharing one basin, the strainer pays for itself the first time it saves you from clearing a trap.\n\nRenters find it useful because nothing is permanent. The old core goes in a drawer, the new one goes in the drain, and you can swap them back on the day you leave.\n\nIt also suits anyone who has given up on a plug that no longer holds water. If you have been shoving a folded flannel in the drain to soak something, a working push button sink plug is a small upgrade with a disproportionate effect on daily annoyance.\n\nKitchen sinks and baths can work too, as long as the hole measures in range. Kitchen wastes are often larger, so check before assuming.\n\nFitting it\n\nClear the basin and pull out the old core. Most lift straight out. If yours resists, limescale is usually the reason, so soak the area with white vinegar for twenty minutes and try again with a cloth for grip.\n\nClean the inside of the drain opening while it is empty. Old soap and hair collect on the rim, and anything left there will sit under your new seal and let water seep past.\n\nDrop the new core in and check that it sits level and flush. Press it down, run some water, and see whether the basin holds. Press again and watch it drain. If it holds and releases cleanly, you are finished.\n\nIf it feels slightly loose, take it out and fit the rubber ring, then try again. That ring exists precisely for openings at the wider end of the range.\n\nLiving with it\n\nThe maintenance routine is short. Every week or two, lift the basket, tip the hair into the bin and rinse the basket under the tap. Drop it back and carry on.\n\nWipe the visible cap with a soft cloth and mild soapy water when you clean the basin. Keep bleach, strong drain chemicals and abrasive pads away from it, since all three can dull a metal finish over time.\n\nIn a hard water area, limescale will try to build up on the cap. A soak in white vinegar lifts it, and drying the cap after you clean the basin slows it down considerably.\n\nOne habit worth building: if the basin starts draining slowly, check the basket first. Nine times out of ten that is the answer, and it takes ten seconds rather than an evening with a plunger.\n\nA few things it will not do\n\nIt is honest to be clear about limits. A hair catcher sink plug deals with hair, which is the main cause of bathroom blockages, but it does not clear a pipe that is already blocked. If your drain is slow today, clear the trap first and then fit the new core to keep it clear.\n\nIt also will not fix a leaking waste fitting. If water is escaping under the basin rather than draining slowly, the problem is further down and this part will not touch it.\n\nAnd it will not fit a drain outside its size range, no matter how determined you are. Measure first.\n\nThe short version\n\nIf your basin plug no longer holds water, or your drain keeps slowing down, this is the small part that fixes both. Brass construction means it lasts, the press action means there is nothing to pull or snap, and the internal basket catches the hair that causes most bathroom blockages.\n\nCheck your drain opening measures between 34mm and 38mm inside, lift out the old core, drop this one in, and you are done. Then empty the basket now and then and forget about it.", "llm_summary": "The Brass Basin Plug with Hair Basket (34 to 38mm) is a replacement pop up drain core from, model -005, made from brass. It fits basin drain holes with an inner diameter between 34mm and 38mm and includes a rubber ring to help fit wider openings. A press on the top cap switches between holding water and draining, and an internal strainer basket collects hair to reduce clogging. It installs by hand without tools by removing the old bounce core and dropping this one in. The item measures 6.2cm wide by 5cm high and weighs 100 grams, supplied as a single unit. Colour, finish and country of origin are not specified by the maker.", "returnable": true, "return_policy": "14-day right to cancel from delivery under the Consumer Rights Act 2022, buyer pays return postage; the refund may be reduced if the item has been used beyond normal handling; Consumer Rights Act 2022 rights for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Drains Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://drains.irish/brass-basin-plug-with-hair-basket-34-to-38mm/", "canonical_url": "https://drains.irish/brass-basin-plug-with-hair-basket-34-to-38mm/", "json_url": "https://drains.irish/api/products/brass-basin-plug-with-hair-basket-34-to-38mm.json", "updated_at": "2026-10-12" }